Subscribe:
    Subscribe Twitter Facebook
    Showing posts with label Hacking Tools. Show all posts
    Showing posts with label Hacking Tools. Show all posts

    Monday, February 6, 2012

    MAC Address Changing Tricks / MAC Sppofing

    Most people among us change their IP address and thinks they are anonymous on internet but one thing they forgot that they can be tracked down with MAC address which is still there non spoofed. So what to do then? Its practically impossible to change your MAC address but yes virtually its possible. Here is a application called SMAC that can help you to spoof your MAC address to maintain your anonymity on internet.


    There are few tools Available to make use this ...


    1. SMAC is a MAC Address Changer (Spoofer) for Windows 7, XP, Server 2003, and VISTA systems, regardless of whether the manufactures allow this option or not. 


    There other wAys..



    Change the MAC address in Windows
    1. Go to Start -> Control Panel. Double click on Network Connections (inside Network and Internet Connections category in Windows XP). The, right click on the active network connection with network adapter that you want to change the MAC address (normally Local Area Network or Wireless Network Connection) and click on Properties.
      Above steps work in Windows XP, Windows 2000 and Windows Server 2003. For Windows Vista, access to NIC’s properties is from Control Panel -> Network and Internet -> Network and Sharing Center -> Manage Network Connections.
      Alternatively, if you already know which network adapter that’s responsible for your network or Internet connection, go to Device Manager and open the properties dialog by double click on the NIC itself.
    2. In the General tab, click on the Configure button.
    3. Click on Advanced tab.
    4. In the Property section, select and highlight Network Address or Locally Administered Address.
    5. To the right, “Not Present” radio button is by default selected as value. Change the value by clicking on radio button for Value:, and then type in a new MAC address to assign to the NIC.
      Change MAC Address of Network Adapter
      The MAC address consists of 6 pairs of numbers (0 – 9) and characters (A – F) combination. For example, 88-17-E8-90-E2-0A. When entering the new MAC value, omit the dash (-), for example 8817E890E20A.
    6. Click OK when done.
    7. To verify the change of MAC address, go to command prompt, then type in one of the following commands:
      ipconfig /all
      net config rdr
    8. Reboot the computer if successful to make the change effective.
    Note: To restore or reset back to original default MAC address, simply set back the option to “Not Present”.
    Change the MAC Address of NIC in Windows via Registry
    1. Open a command prompt.
    2. Type the following command and hit Enter.
      ipconfig /all
    3. Record down the Description and the Physical Address (is MAC address) of the active network connection (discard those with Media Disconnected state).
      Get MAC Address for Network Card
      For example, in figure above, Description is Intel(R) Wireless WiFi Link 4965AGN and MAC address is in the format of 00-XX-XX-XX-XX-XX.
    4. In the command prompt also, type the following command and hit Enter.
      net config rdr
    5. Record down the GUID for the MAC address for the active connection’s NIC which MAC address to be changed. The GUID is contained within the { and } brackets right in front of the MAC address as shown in figure below.
      GUID for the NIC
    6. Type regedt32 or regedit in Start -> Run box or in Start Search for Windows Vista. Note: for Windows NT 4.0 and Windows 2000, regedt32 must be used.
    7. Navigate to the following registry key:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}
    8. Expand the {4D36E972-E325-11CE-BFC1-08002BE10318} tree, and there will be more sub-keys in the form of 0000, 0001, 0002 and so on.
    9. Go through each sub-key starting from 0000, look for subkey that has DriverDesc value data that matches NIC description copied from step above, that want its MAC address to be changed. In most cases, it will be similar to the network adapter card name.
      To verify that the subkey found is indeed a correct one, check the value of the NetCfgInstanceId, which should have the same value with the NIC’s GUID taken from step above.
    10. Once a sub-key is matched to the network interface card that MAC address want to be spoofed, select and highlight the subkey. Right click on the sub-key (for example, 0000), then select New ->String Value. Name the new value name as NetworkAddress.
      Note: If NetworkAddress REG_SZ registry key is already existed in the right pane, skip this step.
    11. The double click on NetworkAddress and enter a new MAC address as its value data.
      Change and Spoof MAC Address in Registry
      Note that the 12-digit MAC address in hexadecimal format, and should be entered without any dash (-). For example, 1A2B3C4D5E6F.
    12. Reboot the system to make the new MAC address effective. Alternatively, if you don’t want to restart the system, try to disable and then re-enable the network adapter in Device Manager.
    13. To verify the change of MAC address, go to command prompt, then type in one of the following commands:
      ipconfig /all
      net config rdr
    Note: To restore or reset back to true original hardware burned-in MAC address, remove the NetworkAddress registry key that is been added.
    Alternative: Third party tools and utilities to change the MAC address in Windows operating system are plenty, for example: SMAC (direct download link to smac20_setup.ex, supports Windows Vista, XP, 2003, 2000), Macshift (direct download link to macshift.zip, for Windows XP), BMAC (almost identical SMAC MAC changer clone by moorer-software.com), Mac MakeUp (direct download link tomacmakeup.zip, for Windows 2000/XP/2003/Vista), MadMACs (MAC Address Spoofing And Host Name Randomizing App For Windows, directly download MadMACs.zip), EtherChange (direct download link to etherchange.exe), and Technitium MAC Address Changer (for Windows 2000 / XP / Server 2003 / Vista / Server 2008).
    How to Change MAC Address (MAC Spoofing) in Linux and *nix
    To change your MAC address in Linux and most Unix-like (*nix) system, run the following script commands:
    ifconfig down
    ifconfig hw
    ifconfig up
    For example, the command looks lik “ifconfig eth0 down hw ether 1A:2B:3C:4D:5E:6F”. First command brings down the network interface, second command change its MAC address while third command bring up the interface again. Note that in some cases, to bring down and bring up the network interface, the following commands have to be used:
    /etc/init.d/networking stop or /etc/init.d/network stop (in the case of Fedora Core 5)
    /etc/init.d/networking start or /etc/init.d/network stop (in the case of Fedora Core 5)
    Alternatively, for Fedora Code 5 Linux with Iproute2 tools installed, the following commands also can change the MAC address to spoofed version:
    /etc/init.d/network stop
    ip link set address 1A:2B:3C:4D:5E:6F
    /etc/init.d/network start
    For example, “ip link set eth0 address 1A:2B:3C:4D:5E:6F”. To check whether the MAC address has been spoofed, use ip link ls eth0 or ip addr ls eth0 instead of using ifconfig eth0.
    How to Make the Spoofed MAC Address Permanently Even After Reboot in Linux
    Edit the ifcfg-eth0 file (or other similar file if you’re changing different interface), add the following variable line to the file:
    MACADDR=12:34:56:78:90:ab
    Then run service network restart to make the change effective immediately.
    How to Make the Spoofed MAC Address Permanently on Restart in Debian
    Edit the /etc/network/interfaces file and add in the following variable line to the appropriate section so that the MAC address is set when the network device is started.
    hwaddress 02:01:02:03:04:08
    For example, “hwaddress ether 02:01:02:03:04:08″.
    Alternative: GNU Mac Changer (for Debian, Slackware, ArchLinux, Mandrake, Crux and other RPM-based distributions such as Fedora, Red Hat, CentOS, ASPLinux, SUSE Linux, OpenSUSE and etc.
    How to Change MAC Address (MAC Spoofing) in BSD or FreeBSD
    Issue the following commands in shell:
    ifconfig down
    ifconfig
    ifconfig up
    First command brings down the network interface (optional), second command change its MAC address while third command bring up the interface again (optional). For example, the command looks lik “ifconfig xl0 link 1A:2B:3C:4D:5E:6F” or “ifconfig fxp0 ether 1A:2B:3C:4D:5E:6F”
    How to Change MAC address in Solaris
    The shell command to change the MAC address in Sun Solaris is as below:
    ifconfig

    For example, the command looks like “ifconfig hme0 ether 1A:2B:3C:4D:5E:6F”. Note that the change is temporary that does not persist after a reboot. To make this change permanent, the command can be placed in a runtime control script (/sbin/sh).
    How to Spoof MAC Address in HP-UX
    It’s possible to change MAC address using HP-UX SAM. Select Networking and Communications, then selecting the interface, then click on Action -> Modify -> Advanced Options. Finally, change the value of station address, which is MAC address name in HP-UX.
    How to Spoof and Change MAC Address in OpenBSD
    Use the following command to change MAC Address to spoofed MAC in OpenBSD (after version 3.8):
    ifconfig lladdr
    For example, “ifconfig bge3 lladdr 1A:2B:3C:4D:5E:6F”.
    How to Change to Spoofed MAC Address Permanently in OpenBSD
    To make the MAC address changed at boot before network connection is established, and even before parsing of hostname.* file, edit the /etc/netstart file to add in the following lines before the line of “# Now parse the hostname.* file”:
    if [ "$if" = "INTERFACE" ]; then
    ifconfig lladdr
    fi
    # Now parse the hostname.* file
    ....
    How to Change MAC Address in Mac OS X
    Since Mac OS X 10.4.x (Darwin 8.x) onwards, the MAC address of wired Ethernet interface can be altered in Apple Mac OS X in a fashion similar to the Linux and FreeBSD methods. To do so, type the following command in Terminal.app:
    sudo ifconfig en0 ether aa:bb:cc:dd:ee:ff
    or
    sudo ifconfig en0 lladdr aa:bb:cc:dd:ee:ff (for Mac OS X 10.5 Leopard)
    where en0 is the network interface (numbered from en0, en1, en2 …) and aa:bb:cc:dd:ee:ff is the desired MAC address in hex notation.
    Alternative: MacDaddy (download MacDaddyX.dmg, support Airport wireless adapter)




    Monday, January 2, 2012

    Make Your USB Device The Ultimate Hacking Tool



    Now, the other day I was just Googling a few things, and I came across a few things that might interest you.




    What if every time you inserted your thumb drive into a computer, it gave you all the sensitive data on the computer? That (and then some) is now possible. 




    First, I reccomend partitioning your flash drive. Search Google for 
    'bootit lexar', find it, and download it. Now insert your flash drive and then run BootIt.exe, which is inside the folder you downloaded. Before going any further, backup all your data on your flash drive. Now on your BootIt window, click Flip Removable Bit. Now take out your thumb drive and re-insert it.




    Now, what you just did was reverse the bit rate of your thumb drive. Normally, Windows recognizes thumb drives as Removable Media because of thumb drives' bit rates. But when you flip the bit rate, you change it to the bit rate of a removable drive. Since Windows now recognizes your thumb drive as a removable drive, you can now partition it. 




    Now, go to Start, then Run. Type diskmgmt.msc. Now find your drive in the top box and left click it. It should appear in the bottom box. Now right click it and select Delete Partition. Once it is finished, right click it again and Select New Partition. From the window that comes up, you can select how much space should be allocated in your first partition, you can give the partition a name, and also select which format the partition should be in. I reccomend the FAT32 format. 




    You can repeat these steps to create new partitions. 




    Now for the fun part. You can choose what you want to do with each partition. On the first one, I installed Ubuntu 8.04 Hardy Heron on one. On another, I put USB SwitchBlade and other programs on. And on another, I put a Ophcrack Live version on.




    To install Ubuntu (or another distro) on your drive, you can always Google that. 




    USB SwitchBlade is a tool created by Hak5. Once the files are copied to your drive, you can plug your drive into any computer. Once you run the program, it copies a LOT of sensitive data onto your flash drive. Each computer is separated in separate directories automatically. 




    Other USB programs can be found at Nirsoft.net and if you do a little searching (or if you already know how), you can edit an autorun file for these. I put programs such as Angry IP Scanner. You can also search Google for 'USB Programs', or you can wait a bit until I can complie a link list.




    Ophcrack can be installed easily. Just search Google. 
    *Note that the USB SwitchBlade works best under Windows XP.


    In my previous posts , you can find how install BT on USB Drive.... It will useful too


    Wednesday, December 16, 2009

    Crack WEP encryption (wifi security)


    Efforts to crack WEP encryption have been around and even publicly discussed since the inception of the WEP protocol, and this page brings you information about how to discover and calculate a WEP key from network traffic. This introduction to WEP cracking may be useful to anyone who intends to investigate network security.
    Cracking WEP itself is relatively easy and can take anywhere from as little as a few minutes to a few hours (depends on the amount of network traffic, connection quality, etc.). Setting up your equipment so that it does what it needs to do can take weeks (depends on what you have and what you already know). Before you proceed to WEP cracking, read our first page of this "tutorial" which can provide an idea about setting your computer and also about the legality of WEP cracking.


    Now we can proceed to demonstrating how to crack WEP encryption.



    What do I need to discover a wireless network WEP key?



    Here is a list of assumptions that you need to meet in order to be able to discover a WEP key from network traffic. Note, the assumptions listed below are specific to this tutorial. Other tutorials on the web are based on different assumptions.


    • Software and hardware: Ubuntu, Intel PRO/Wireless 3945ABG with the ipwraw-ng-2.3.4 driver (or alternatively TP-LINK TL-WN321G network adapter with the rt73-k2wrlz-3.0.1. driver), aircrack-ng-1.0. (Of course, you can use some other adapter as well, Intel and TP-LINK is what we used.)
    • You are physically close enough to the access point to send and receive packets. Remember that just because you can receive packets from the wireless access point does not mean you will be able to transmit packets to the access point. The wireless card strength is typically less than the access point strength, so you have to be physically close enough for your transmitted packets to reach and be received by the access point.
    • There is at least one wireless client connected to the network and active. The reason is that WEP cracking relies on ARP packets and if there are no active clients then there will never be any ARP request packets.
    Ensure that all of the above assumptions are true, otherwise the examples that follow will not work.
    We have tested WEP cracking with two network adapters: Intel PRO/Wireless 3945ABG with the ipwraw-ng-2.3.4 driver and alternatively TP-LINK TL-WN321G network adapter dongle with the rt73-k2wrlz-3.0.1. driver. The Intel adapter is referenced as wlan0(wifi0), and the TP-LINK adapter is referenced as rausb0. You can find the name of your network adapter by executing the iwconfigcommand.



    Does my network adapter driver work correctly?



    One of the assumptions in this article is that your network interface drivers need to be patched for monitor mode and packet injection. (See the How to crack WEP with Intel PRO/Wireless 3945ABG link mentioned above for more details.)


    Monitor mode test
    If you loaded your driver module correctly, your network adapter might already be in Monitor mode. If it is not, try executing the following command:


    sudo airmon-ng start wlan0
    Wlan0 (and also wifi0) is the name of your Intel 3945 network adapter. It would be rausb0 if you worked with the TP-LINK 321. You can find the name of your network adapter by executing the iwconfig command. The print screen below shows you what you want to see in your iwconfig screen.


    How to break WEP encryption - interface monitor mode
    If the network interface is set correctly, it should say Monitor mode.


    Packet injection test
    Use the injection test to confirm your card can inject prior to proceeding. Try executing the following two commands in your terminal window:


    aireplay-ng -9 wifi0
    aireplay-ng -9 127.0.0.1:666

    They both should result in the "Injection is working!" message. You can find more details here: http://aircrack-ng.org/doku.php?id=injection_test.


    How WEP cracking works?

    Ok, we have all the hardware and software ready, now it is time to explain how WEP cracking works.
    Here are the basic steps we will be going through:


    1. Start the wireless interface in monitor mode
    2. Start airodump-ng to discover all the available networks and find your target
    3. Change your MAC address (optional)
    4. Start airodump-ng on AP channel with a bssid filter to collect the new unique IVs
    5. Use aireplay-ng to do a fake authentication with the target access point
    6. Start aireplay-ng in ARP request replay mode to inject packets
    7. Run aircrack-ng to crack key using the IVs collected
    Sounds easy? Let's get into the details.


    1. Start the wireless interface in monitor mode



    If you want to listen to network traffic and to capture network traffic, your network adapter needs to be in Monitor mode. We already covered this above and also on the How to crack WEP with Intel PRO/Wireless 3945ABG page.



    2. Start airodump-ng to discover all the available networks

    If you want to crack WEP, you need to know a little more than just the network name. You also need to know the MAC address of the wireless access point or wireless router which you can find by executing the following command:


    sudo airodump-ng wifi0
    This is what you will get.


    Break crack WEP: airodump-ng monitor wireless networks
    You can see names of available wireless networks in the most right column and MAC addresses of access points in the most left column. This screen also tells you how each network is secured (WEP, WPA, OPN, etc). You can also find out on which channel each access point operates.



    3. Change your MAC address (optional)



    In order to take advantage of the packet injection technique, you need to be associated with the target wireless access point. Many wireless networks are protected not only by WEP encryption but additionally also by MAC filtering. If that is the case with your target network, you need to first discover a MAC address of an already associated user and then use that MAC address for your own authentication and association. Read the following two pages:


    How to break MAC filtering (wifi security)
    How to change MAC - Macchanger

    Note, you will need to disable your network adapter before changing your MAC address and then enable it again, so it is an exercise that goes through the two pages referenced above as well as through point 1 and 2 again.


    How do I find a MAC address?
    Remember, you need to find a client on the network that is already associated with your target access point. You can do so by executing the following command in your Ubuntu terminal window:


    sudo airodump-ng -c 11 --bssid 00:02:72:51:DB:28 -w wepdump -i wifi0
    where -c is the channel on which your target access point is broadcasting, BSSID is the MAC address of the access point, and -w wepdump -i (we will explain later).


    How to crack WEP - airodump-ng capture MAC address
    The screen will look similar to the screen above.


    4. Start airodump-ng to collect the new unique IVs





    By now, you should have all the needed information about your target access point (name, MAC, channel, etc.), your MAC address changed to the same address as some other client on the network, and your network interface set in Monitor mode. Now you want to start capturing all the new unique so-called Initialization Vectors (IVs) included in packets that go out of your access point. You can do this by starting airodump-ng on your access point channel with a BSSID filter (access point MAC address). Open new terminal window and do:


    sudo airodump-ng -c 11 --bssid 00:02:72:51:DB:28 -w wepdump -i wifi0
    This is the same command as in step 3. We used it in step 3 to find someone that is already using your wireless access point; now we use it to capture initialization vectors. The option -w wepdump is the name of file where you want to save your initialization vectors. Option -i means that you want to save initialization vectors only and discard all other data.
    The screen will look similar to the screen above in step 3.


    5. Use aireplay-ng to do fake authentication with the access point

    Now it is time to sort of "login" into your wireless network. In order for an access point to accept a packet, the source MAC address must already be associated. If the source MAC address you are injecting (later) is not associated with the access point then the access point ignores the packet and sends out a "DeAuthentication" packet in cleartext. In this state, no new initialization vectors are created because the access point is ignoring all the injected packets. The lack of association with the access point is the single biggest reason why packet injection fails. At this point you are just connecting to the access point and telling it you are here and want to talk to it. This does not give you any ability to transfer data. Open another terminal window and do:


    sudo aireplay-ng -1 0 -e datel -a 00:02:72:51:DB:28 -h 00:13:CE:EC:45:20 wifi0
    where -1 means fake authentication, 0 means reassociation timing in seconds, -e datel is the name of the network, -a is the access point MAC address, and -h is the MAC address under which you act (either your own or the spoofed one if you went through step 3).
    This is what the output should look like.


    WEP crack: aireplay-ng fake authentication
    Remember, the MAC address you target for injection must be associated with the access point by either using fake authentication or using a MAC address from an already-associated client (step 3), or both at best.
    Possible problem: If you get "Got a deauthentication packet" and then continuous retries, then you are probably dealing with MAC filtering (that is some access points are configured to only allow selected MAC addresses to associate and connect). Go back to step 3. If this is the case, you will not be able to successfully do fake authentication unless you know one of the MAC addresses on the allowed list.
    Possible problem: If you get "Waiting for beacon frame (BSSID: ...) No such BSSID available." then you are dealing with weak wifi signal. Get closer to the access point.


    Sending Authentication Request [ACK]
    Sending Authentication Request [ACK] that just keeps repeating on the aireplay-ng screen is another common problem. If you keep getting "Sending Authentication Request" or "Sending Association Request" that keep coming back, then you are too far away from the access point or are dealing with weak signal. Remember, the fact that you can capture packets from the access point does not mean that the access point can also capture packets from your computer. The signal going out of your computer is much weaker.
    Also, check that you are communicating on the same wireless channel as the access point.
    Another problem can be that the access point utilizes MAC addressing and your MAC spoofing in step 3 did not go right. Run theifconfig [adapter_name] and macchanger --show [adapter_name] commands to verify your computer is communicating using MAC address of some already authenticated user. (See the download Macchanger page, "How to verify" section for more details.)
    In some cases, the access point is unable to communicate quickly enough with your computer. In this case, try to increase your delay and timing:


    sudo aireplay-ng -1 6000 -o 1 -q 10 -e datel -a 00:02:72:51:DB:28 -h 00:13:CE:EC:45:20 wifi0
    Some times, the fake authentication just does not work no matter what you do and you have to proceed without it.


    5.1 WEP crack without packet injection

    If the previous step fails in your case, and you are unable to do authentication with either a fake or your own MAC address, the next step 6 - packet injection - will likely fail too. Try it out and see. If step 6 fails, return to this section. No worry, you can still crack WEP; it will just take more time. If you are unable to authenticate and as a result do packet injection, you will be watching the screen which you opened in step 4 for a while.


    How to crack WEP
    Your goal is to see at least 150,000 in the #Data column. If you look at the RXQ column in the print screen above, you can see there number 49. This value provides information about the quality of your wireless connection between the access point and your computer. Anything below 80 is considered weak. If the number fluctuates a lot, you have weak signal as well.
    The RXQ value relates to the data stream going from the access point to your computer. Even if this number is above 80, the access point still may not be able to see your computer. This is the most common reason for fake authentication and packet injection to fail. If that is your case, just sit back and wait until the #Data column shows at least 150,000, and then try step 7 (WEP crack). Without authentication and packet injection, this process might take 1,5 - 2 hours. You can start trying WEP crack in step 7 as soon as the #Data reaches at least 80,000, but our experience is that WEP keys usually get cracked once having somewhere around 150,000 initiation vectors.


    6. Start aireplay-ng in ARP request replay mode to inject packets

    To crack a WEP key for a wireless access point, we need to gather a lot of initialization vectors (IVs), ideally somewhere around 150,000 of them. Normal network traffic does not typically generate these initialization vectors very quickly. Theoretically, if you are patient, you can gather sufficient IVs to crack the WEP key by simply passively listening to the network traffic and saving them (step 5.1). Alternatively, you can use a technique called packet injection to actively speed up the process. Injection involves having the access point resend selected ARP packets (they include IVs) over and over very rapidly. This allows us to capture a large number of initialization vectors in a short period of time. So, the purpose of this step is to start aireplay-ng in a mode which listens for ARP requests then reinjects them back into the network. Open another terminal window and do:


    sudo aireplay-ng -3 -b 00:02:72:51:DB:28 -h 00:13:CE:EC:45:20 wifi0
    where -b is the access point MAC address, and -h is the MAC address under which you act (either your own or the spoofed one if you went through step 3).
    This command will start listening for ARP requests and when it hears one, aireplay-ng will immediately start injecting it. You can generate an ARP request by pinging some other client that is already associated.
    This is what the output should look like:


    Packet injection with aireplay-ng in how to crack WEP
    You can confirm that you are injecting by checking your airodump-ng and aireplay-ng screens. The data packets should be increasing rapidly. The ”#/s” should be somewhere in the range of 300 to 400 data packets per second. It can as low as a 100/second and as high as a 500/second. The ARP packets and Sent packets should be increasing rapidly as well.
    Possible problem: Note, if the ARP packets count and the Sent count as well are stuck at zero, then your network interface is likely not associated with your access point. Or, you can also be too far away from the access point (weak signal).
    Possible problem: Message similar to "Got a deauth/disassoc packet. Is the source mac associated?" means you have lost association with the access point. Go back to your other window from step 5 and rerun fake authentication. This is not necessary if you went through step 3 though.


    7. Run aircrack-ng to crack the WEP key using the IVs collected

    Once you have captured a large number of initialization vectors, you can use them to determine the WEP key. There are two basic methods for cracking WEP: the PTW method and the FMS/Korek method.
    To crack the WEP open another terminal window and execute the following commands:


    sudo aircrack-ng -z -b 00:1A:92:77:BB:D9 wepdump*.ivs
    sudo aircrack-ng -a 1 -0 -n 128 wepdump*.ivs

    where -z invokes the PTW WEP-cracking method, -b selects the access point we are interested in, wepdump*.ivs selects all files starting with "wepdump" and ending in ".ivs" (this comes from your airodump-ng command earlier), -a denotes FMS/KoreK attack, and -nselects the type of WEP key (128-bit in our case). These commands will calculate WEP key from the captured initialization vectors. This is what the output looks like:


    Crack WEP
    You made it! Interested in more fun stuff? Read the following two articles:


    How to find MAC and IP addresses in network data
    How to break MAC filtering
    Now that you know how to break into a WEP-protected network and therefore have discovered the weak link in your wifi network, we would also like to draw your attention to our security tutorials. We have written a few tutorials related to wireless network security. You can read more about IPSec, VPN, MAC addressing, WPA, WPA2, PSK, and many other wireless security measures. Our wireless security tutorials help you to make your network more secure.
    And lastly,




    source : http://www.maxi-pedia.com/


    Bidvertiser